Product Overview
Product 32 is an all-in-one home energy storage and backup platform for customer-defined essential loads. Depending on the approved configuration, it may integrate grid input, rechargeable battery storage, inverter output, optional solar charging and selected AC/DC/USB interfaces.
Engineering note: This page describes configurable product concepts, not a single fixed electrical model. Inverter rating, battery capacity, output waveform, load compatibility, runtime and changeover behaviour must be confirmed for the selected design.
Key Features
Availability of each function depends on the approved BOM, power electronics, battery management system, protection devices and validated firmware/control logic.
Applications
Application suitability depends on appliance wattage, starting surge, voltage compatibility and required backup duration. High-power heating appliances, air conditioners and other heavy loads should not be assumed compatible without engineering review.
Product Architecture
The product architecture may include AC input/charging, rechargeable battery storage, inverter output, optional solar charge control, BMS integration, output distribution and electrical protection. The actual topology and ratings depend on the approved configuration and must be confirmed through the final design and validation.
For the Indian market, confirm 230V/50Hz compatibility, protective earthing/insulation, transfer behaviour, surge capacity, charging limits, battery chemistry and grid-isolation behaviour for the selected design. Grid export is not assumed; define and validate the intended operating mode.
Product Configuration / Application Variants
The numbered options below organize relevant product forms, end-use applications and customer-specific adaptations for OEM / ODM projects. The selected configuration is finalized against the approved drawing, material and performance requirements, validation plan and commercial scope.

01. Essential Fan & LED Backup Inverter
Fans and LightingBackup for compatible ceiling/table fans and LED lights. Confirm motor starting surge, combined wattage and required runtime.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
02. Compact Home Backup Inverter
Compact Residential BackupCompact-format development concept for selected low-power household essentials, subject to thermal and safety review.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
03. LiFePO4 Home Backup System
LiFePO4 Storage OptionLiFePO4 battery architecture may be evaluated with a compatible BMS, charger, inverter and protection design.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
04. Longer-Runtime Battery Backup
Extended Backup DurationCapacity-led configuration for customers requiring longer runtime; usable energy and load profile determine actual duration.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
05. Automatic EB Backup Inverter
Grid Outage BackupGrid/EB input and battery-supported output with automatic changeover only where engineered and validated.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
06. Pure Sine Wave Inverter Platform
AC Output OptionPure sine-wave output may be specified where required by the selected appliances and approved inverter design.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
07. DC Essential Appliance Backup
Low-Voltage LoadsLow-voltage DC outputs for compatible devices; voltage, current, connectors and protection are defined per application.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
08. USB Device Charging Backup
USB Output OptionOptional USB charging ports for supported devices with defined output standards and power limits.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
09. Wi-Fi Router & Modem Backup
Connectivity ContinuityApplication for compatible routers and modems after confirming output voltage, current, connector and runtime.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
10. CCTV & Security Backup
Security ElectronicsBackup for compatible CCTV cameras, recorders and network equipment subject to load and voltage matching.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
11. Home Office Backup Inverter
Work-from-Home EssentialsFor selected low-power office essentials; computers, monitors and printers require a verified power budget and surge assessment.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
12. Small Shop Backup System
Retail & KioskFor selected shop essentials such as lights, router and compatible point-of-sale equipment.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
13. Rural Household Backup System
Rural Essential LoadsConfigurable grid-input backup for selected household essentials in locations with unreliable power.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
14. Apartment Essential Backup
Apartment UseA configuration concept for permitted essential loads in apartments, subject to installation and electrical requirements.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
15. Study Room & Student Backup
Study EssentialsBackup concept for LED lighting, router and compatible study devices with capacity matched to the use case.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
16. LED Lighting Backup Unit
Lighting CircuitsDesigned around selected LED loads after checking driver compatibility, total wattage and desired backup duration.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
17. Multi-Output Home Backup
Multiple Output InterfacesMultiple AC/DC interfaces may be considered with defined voltage, current, total-load limits and individual protection.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
18. Wall-Mounted Backup Inverter
Installation FormatWall-mounted enclosure concept subject to ventilation, mounting, service access and electrical safety requirements.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
19. Floor-Standing Backup System
Higher-Capacity FormatFloor-standing format may be considered where battery mass, capacity, ventilation and service access require it.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
20. Portable-Format Backup Power
Compact Portable ConceptPortable format is a development direction only, subject to battery mass, handling, enclosure and electrical safety review.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
21. Custom Battery Capacity System
Customer-Specified CapacityBattery energy and inverter ratings are selected from the load list and desired autonomy, not fixed by this page.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
22. Private-Label Home Inverter
OEM BrandingBranding, labels, manuals, packaging and market-specific documentation can be reviewed for the approved configuration.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
23. OEM Inverter Battery Integration
System IntegrationIntegration concept for compatible inverter, battery, BMS, charger and protection components.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
24. Backup for Home Networking
Network EquipmentApplication-led backup for compatible modem, router, access point and network accessories with verified power requirements.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
25. Custom Essential-Load Backup Platform
OEM / ODM CustomizationCustomer-specific platform scope can cover enclosure, interfaces, battery capacity, output rating, branding and validation.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
26. Solar-Assisted Home Backup Inverter
Solar ChargingHome backup configuration using compatible PV input and internal storage; confirm the approved solar input range and charge-control design.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
27. Small Clinic Essential Backup
Clinic EssentialsPotential backup for selected lighting, router and compatible low-power clinic equipment after load and runtime review.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
28. Farm Office & Pump-Control Backup
Farm OfficeFor selected farm-office electronics and control equipment; motor or pump loads need separate surge and power assessment.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
29. Retail POS & Billing Backup
Point-of-SaleBackup for compatible POS terminal, barcode scanner, router and lighting with validated output and runtime.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
30. Education & Tuition Centre Backup
EducationApplication concept for lighting, connectivity and selected teaching electronics based on a verified load profile.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
31. Pharmacy Refrigerator Support Review
Specialist Appliance ReviewRefrigeration is not assumed compatible; assess compressor surge, continuous power, waveform and required runtime before selection.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
32. Security Gate & Access Control Backup
Access ControlFor compatible access-control, gate electronics and network devices; motors require a dedicated surge and compatibility review.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
33. Remote Monitoring Station Backup
Remote MonitoringPotential backup for low-power sensors, gateways and monitoring electronics with environment and autonomy specified.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
34. Multi-Room Essential Load Backup
Multiple Essential LoadsCustomer-defined combination of selected room lighting, fans and connectivity, limited by validated inverter and battery ratings.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
35. Gulf / Export-Market Private Label
Export OEM / ODMPrivate-label configuration concept for destination-market voltage, plug, documentation, packaging and applicable compliance review.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
36. Kitchen Lighting & Router Backup
Kitchen EssentialsBackup concept for selected kitchen lighting, connectivity and low-power electronics; exclude heating appliances unless the system is specifically rated for them.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
37. Home Security & Alarm Backup
Alarm SystemsFor compatible alarm panels, sensors, communication gateways and related low-power equipment with verified voltage and autonomy.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
38. Small Office Workstation Backup
Office EquipmentSupports evaluation of selected workstation and networking loads after confirming total wattage, surge and required runtime.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
39. Salon & Small Service Business Backup
Small BusinessFor selected lights, router and billing electronics; salon heaters, dryers and motor loads require separate power assessment.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
40. Clinic Reception & Records Backup
Clinic SupportApplication concept for reception lighting, networking and records equipment; not a substitute for dedicated medical-grade power systems.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
41. School Office & Administration Backup
Education SupportFor selected office electronics, Wi-Fi and lighting in schools or tuition centres, based on a documented load list.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
42. Farmhouse Essential Backup
Rural ResidentialFor selected farmhouse lights, fans and connectivity where system capacity and installation conditions are verified.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
43. Workshop Control Electronics Backup
Control ElectronicsFor compatible control panels and low-power electronics; tools, compressors and motors require separate surge and power review.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
44. Retail Display & Billing Backup
Retail BackupFor compatible display lighting, POS terminals and networking equipment with defined output and runtime requirements.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
45. Small Restaurant POS Backup
HospitalityFor selected billing, router and emergency lighting loads; cooking equipment and refrigeration require dedicated compatibility review.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
46. Community Room Lighting Backup
Community FacilitiesA configurable concept for selected lighting and connectivity loads in community rooms, subject to approved load limits.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
47. Guest Room Essential Backup
Hospitality RoomsFor selected guest-room lighting, connectivity and low-power essentials, subject to installation and electrical safety review.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
48. Remote Sensor & Gateway Backup
IoT / MonitoringFor compatible IoT gateways, sensors and monitoring devices with defined DC output, environmental and autonomy requirements.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
49. Solar-Ready Private-Label Backup
Solar-Ready OEMOEM concept combining customer branding with optional solar charging only when included in the validated electrical architecture.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
50. Custom Home Energy Backup Platform
Custom OEM / ODMA customer-defined home backup platform with selected enclosure, battery, charging, output and documentation requirements reviewed before release.
| Power & Runtime | Set after load, surge and backup-duration assessment |
|---|---|
| Safety & Protection | To approved design and applicable validation |
OEM & ODM Manufacturing
Nakoshi Global can evaluate customer-specific product development across requirement capture, design-for-manufacturing review, component integration, assembly planning, testing, packaging, private label and production documentation. Final scope is agreed against the customer’s approved specification.
India Manufacturing & Value Addition
The platform is presented for India-based OEM/ODM development and manufacturing evaluation. The actual manufacturing route, component sourcing, assembly operations and any country-of-origin claim must match the product’s documented production process.
Customization & Integration
For an engineering review, provide target loads and wattage, motor starting surge where relevant, desired backup duration, battery chemistry/capacity preference, grid input conditions, inverter output voltage and waveform, enclosure constraints, operating environment, market and target volume.
Quality, Electrical Safety & Validation
Validation should cover grid input and inverter output ratings, charging behaviour, battery/BMS compatibility, overload and short-circuit protection, thermal performance, earthing/insulation where applicable, backup changeover, runtime, enclosure safety and packaging. Applicable standards and certification obligations must be determined for the final product and destination market; no certification is claimed by this page.
Why Choose Nakoshi Global
Nakoshi Global offers an integrated OEM/ODM discussion point for product engineering, component integration, assembly, validation, customization, packaging and domestic or global supply. Explore About Us, Capabilities and OEM / ODM services.
Frequently Asked Questions
What is Product 32?
P32 is an OEM/ODM platform for an all-in-one home inverter and battery backup system built around EB/grid input, rechargeable storage and inverter output.
Can solar charging be included?
Optional solar charging can be evaluated where it is supported by the selected charge controller, battery, input limits and overall power architecture. Confirm the final design specifications before ordering.
Can it support two fans and two LED lights?
This load profile can be evaluated. Final suitability depends on fan wattage and starting surge, light wattage, inverter capacity, battery energy and target runtime.
Which battery chemistry is supported?
LiFePO4 is a possible battery option when supported by the selected charger, BMS, inverter and protection architecture. Confirm the approved configuration.
Will it switch to battery during a power cut?
Automatic backup can be specified if the selected system includes validated changeover, inverter, battery and protection functions.
How long will the backup last?
Runtime depends on usable battery energy, total load, inverter efficiency, battery condition and operating conditions. It should be calculated and tested for the chosen configuration.
Can it power a refrigerator or motor load?
Only after checking continuous power, starting surge, waveform requirements and runtime. Compatibility is not guaranteed for every appliance.
Can it be customised for OEM/private label?
Custom branding, enclosure, interfaces, documentation and packaging can be reviewed as part of the agreed OEM/ODM scope.
Does P32 export power to the grid?
Grid export is not part of the stated P32 platform description. The final operating mode must be explicitly defined and validated.
What information is needed for a quotation?
Share the appliance list, wattage, starting surge, desired backup duration, battery preference, input/output requirements, target market and expected volume.
Related Products
OEM / ODM Enquiry
Share your application, load list, required backup time, solar and battery preferences, drawing or sample, target market and expected volume. The team can review the appropriate technical and manufacturing route.
REQUEST OEM / ODM QUOTATION DISCUSS PRODUCT DEVELOPMENT