Product Overview
Product 07 covers signal lamp and indicator assemblies for home appliances, control panels and electrical OEM applications. The source identifies LED and Neon types and customer-specific engineering review.
Key Features
LED / Neon signal lamp types, home appliance integration, control panel applications, plastic housing and metal terminals, and the stated 3V–240V AC/DC range.
Applications
Product Architecture
The Product 07 configuration consists of a signal lamp assembly with LED / Neon options, plastic housing and metal terminals. Final indicator type, colour, mounting, wiring and electrical interface should be confirmed against the customer's approved application and specification.
Product Configuration / Variants
The numbered options below organize relevant product forms, end-use applications and customer-specific adaptations for OEM / ODM projects. The selected configuration is finalized against the approved drawing, material and performance requirements, validation plan and commercial scope.
01. LED Signal Lamp Assembly
LED signal lamp assembly for appliance and electrical OEM products, for power-on and operating-status indication. Final LED colour, circuit, mounting and ratings are confirmed against the approved specification.
02. Neon Indicator Lamp Assembly
Neon indicator lamp assembly for compatible AC electrical equipment and appliance applications. Confirm voltage rating, lamp dimensions, terminal layout and required approvals before production.
03. Red Signal Lamp Assembly
Red signal lamp assembly concept for warning, fault or active-status indication in compatible appliances and control equipment.
04. Green Signal Lamp Assembly
Green signal lamp assembly concept for ready, power-on or normal-operation indication, subject to the equipment design and approved electrical specification.
05. Amber / Yellow Signal Lamp Assembly
Amber or yellow indicator assembly concept for caution and status indication where specified by the OEM.
06. Blue Signal Lamp Assembly
Blue signal lamp assembly concept for selected status indication in appliances, electronic products and control panels.
07. White Signal Lamp Assembly
White indicator lamp assembly concept for status visibility or illumination where the optical output and fitment are specified.
08. Panel-Mount Signal Lamp
Panel-mount signal lamp assembly concept for appliance fascia, equipment panels and electrical control cabinets. Mounting cut-out and retention method require confirmation.
09. Pre-Wired Signal Lamp Assembly
Pre-wired signal lamp assembly with customer-defined lead length, wire type, polarity where applicable and termination.
10. Signal Lamp with Connector
Signal lamp assembly with a specified connector and pinout for integration into an OEM wiring loom.
11. Two-Wire Indicator Lamp Assembly
Two-wire indicator lamp assembly concept for compatible electrical circuits. Confirm AC/DC type, voltage, polarity and current requirements.
12. LED Indicator Wiring Harness
LED indicator wiring harness assembly with defined wire length, connector, terminals and routing for appliance production.
13. Neon Indicator Wiring Harness
Neon indicator wiring harness concept for compatible equipment, with insulation, clearances and voltage ratings confirmed by engineering.
14. Rocker Switch Indicator Lamp
Indicator lamp assembly for compatible rocker-switch products, subject to the switch geometry and electrical design.
15. Push-Button Indicator Lamp
Indicator lamp assembly for illuminated push-button or control interfaces, subject to mechanical fit and circuit compatibility.
16. Electric Kettle Indicator Lamp
Signal lamp assembly concept for electric kettles to indicate power or heating status, subject to appliance design and thermal assessment.
17. Water Heater Indicator Lamp
Indicator lamp assembly concept for water heaters and geyser control interfaces. Temperature exposure, insulation and electrical safety must be validated.
18. Microwave Oven Indicator Lamp
Indicator lamp assembly concept for microwave oven control panels and status indication, subject to appliance-specific requirements.
19. Refrigerator Indicator Lamp
Indicator lamp assembly concept for refrigerator status or control interfaces, based on the approved design and operating environment.
20. Washing Machine Indicator Lamp
Indicator lamp assembly concept for washing machine panels and status indication, subject to the customer's electrical and mechanical specification.
21. Rice Cooker Indicator Lamp
Indicator lamp assembly concept for rice cookers and compatible countertop cooking appliances, with operating temperature and ratings verified.
22. Induction Cooktop Indicator Lamp
Indicator lamp assembly concept for compatible induction cooktop control panels, subject to heat, electrical and safety design review.
23. Mixer Grinder Indicator Lamp
Indicator lamp assembly concept for mixer grinders and small kitchen appliances, subject to fitment and circuit compatibility.
24. Air Cooler Indicator Lamp
Indicator lamp assembly concept for air coolers and selected cooling appliances, with environmental and electrical requirements defined by the OEM.
25. Air Conditioner Control Indicator
Signal lamp assembly concept for air-conditioner control interfaces and compatible HVAC equipment, subject to design and electrical validation.
26. Water Purifier Indicator Lamp
Indicator lamp assembly concept for water purifiers and dispensers, subject to enclosure, moisture and electrical design review.
27. Pump / Motor Control Indicator
Signal lamp assembly concept for pump and motor control panels to show approved status conditions; it is an indicator, not a motor-control device.
28. Electrical Control Panel Signal Lamp
Electrical control-panel signal lamp assembly concept with colour and mounting defined by the control-panel drawing and applicable requirements.
29. Industrial Equipment Indicator Lamp
Indicator lamp assembly concept for industrial equipment and machine panels, subject to specified voltage, environment and compliance requirements.
30. OEM Custom Signal Lamp Assembly
Build-to-print or build-to-spec signal lamp assembly concept for OEMs, with approved drawings, component availability, test criteria and commercial scope confirmed before supply.
OEM & ODM Manufacturing
Nakoshi Global is an India-based integrated OEM & ODM manufacturing partner. Customers can submit a drawing, sample, specification, application, existing product or expected volume for engineering and manufacturing evaluation.
India Manufacturing & Value Addition
The platform is positioned for India-based manufacturing, component coordination, assembly and domestic or global OEM supply. Final production scope remains subject to the approved technical and commercial specification.
Customization & Integration
The source identifies customer-defined size, colour, wiring, connector and electrical requirements as part of the OEM development discussion. Appliance integration can be reviewed from a drawing, sample or existing component.
Quality & Validation
The source states a 3V–240V AC/DC range and identifies plastic housing with metal terminals. Final production specifications, testing and compliance requirements should be confirmed against the customer's approved drawing or specification.
Why Choose Nakoshi Global
India-based integrated OEM / ODM support from engineering and component evaluation through manufacturing, assembly and supply.
FAQ
What are signal lamp assemblies used for?
They provide visual indication of power, operating status or control conditions in electrical and appliance products.
Does Nakoshi supply LED and Neon signal lamps?
Yes. The existing Product 07 information identifies both LED and Neon signal lamp types.
What voltage range is stated for Product 07?
The existing product source states a 3V–240V AC/DC voltage range. Final production requirements should be confirmed against the approved customer specification.
Can the signal lamp assembly be customized?
The Product 07 source identifies customer-defined size, colour, wiring, connector and electrical requirements as part of the OEM development discussion.
Which home-appliance applications are listed?
The source lists electric kettles, microwave ovens, refrigerators, washing machines, OEM indicator devices, control panels and electrical appliances.
How can an OEM project be started?
Share a drawing, sample, specification, application or expected volume so the appropriate engineering and manufacturing route can be evaluated.
Related Products
OEM / ODM Enquiry
Share your drawing, sample, specification, application or expected volume. Nakoshi Global can evaluate the appropriate engineering, assembly and OEM manufacturing route for your signal lamp or indicator requirement.
REQUEST OEM QUOTATION DISCUSS OEM / ODM DEVELOPMENT